掌上森林资源调查仪(PDA)二类调查软件的开发应用及特点

阐述了对PDA二类调查软件的研究、实验与应用的过程,总结了调查软件的图像处理及显示、图层设计及调查数据存储、库文件接口程序、导航与定位、资源调查、调查数据统计等功能及特点,对软件作用与发展进行了论述.     

基于成组技术思想的双颚板散货抓斗仿真综合建模

提出了一种基于成组技术思想,针对不同类型双颚板散货抓斗工作过程计算机仿真的综合建模方法。用同一模型同时描述三种不同类型的抓斗,通过改变初始输入条件,来反映不同抓斗的工作规律。     

基于MATLAB仿真的木材铣削模糊控制系统的研究

利用模糊控制理论设计木材铣削加工在线控制系统。并应用MATLAB软件对该模糊控制系统进行验证和仿真，获得了最佳的控制效果。     

Growing situation of afforested trees and damage to lower-story trees caused by felling in multi-storied forest management in Peninsular Malaysia

The growing condition of afforestation trees and damage to lower-story trees caused by felling and hauling of upper-story trees in a multi-storied forest in Peninsular Malaysia was surveyed. Seventy months have passed since the planting ofAcacia mangium upperstory trees, which have grown 233 m³/ha in volume. The growth ofShorea leprosula thirty-five months after planting of lower-story trees have reached 5.54 m in height. However, as the ratio of height to basal diameter exceeds 100:1, trees are tapering to a considerable degree. A backhoe was installed in order to fell the upper-story trees. From the results of logging, the damage ratio estimation of the lower-story trees was simulated by using the Monte Carlo method. The damage ratio differed considerably depending on planting patterns, height of upper-story trees and felling skills. The results of this survey proved that the felling and hauling of upper-story trees would be technically feasible in the future, except when one row upper-story trees and one row lower-story trees method were employed.     

Tropical Tree Growth and Longevity: Validation of Growth Simulation,a Bootstrapping Model

ABSTRACT

Growth Simulation, an analytical modeling technique, has been increasingly used in ecological studies and practical forestry applications where dendrochronology is not applicable. The technique uses randomly sampled diameter increments from tagged trees over a known time interval to assemble a statistical sample of lifetime growth trajectories. We carried out a validation of Growth Simulation using a temperate species in order to compare indirect model outputs with direct tree ring analysis. Rings were measured on sample disks cut from 55 pine branches ranging in age from 8–36 years. Assessments included lifetime growth rates, growth rate with respect to diameter and age, periodic annual increment (PAI), cross-referencing of rings by date, and autocorrelation of growth over successive periods. Tree ring analysis and Growth Simulation showed close correspondence for all parameters tested (maximum, median, and minimum growth rates; longevity estimates). Growth Simulation is found to be a robust and informative technique for studies of tropical tree growth, and is especially useful where analysis of tree rings is not feasible or when bootstrapping analysis of ring data is of interest.     

双源热压机传热分析及输送管道结构设计

利用ANSYS有限元软件对单源载热体(导热油加热,水冷却)和双源载热体(热油和蒸汽同时加热,冷油和水同时冷却)的热压板孔道结构分别进行传热仿真分析,得到相应的温度分布云图及热压板温度随时间的变化曲线.传热仿真分析结果显示,在同样条件下用双源载热体把热压板加热到140℃所用的时间比单源载热体少200 s,双源载热体加热热压板板面最大温差1.2℃;双源载热体冷却所用的时间比单源载热体少330 s,板面最大温差2.6℃.表明采用双源载热体产品可达到优等品的生产要求.同时设计了与双源载热体相适应的载热体输送管道结构.     

基于联合仿真的林业采育作业模拟系统研究

为解决大型林业装备操作训练复杂的问题,优化驾驶与作业,提高森林资源利用率,本文提出基于分布式系统,对采育作业环境进行视景模拟的虚拟现实作业操作模拟器。系统利用虚拟现实软件Unity3D系统,能够模拟车辆行驶与工作的动力学模型,实时运动仿真包括底盘系统与地面的交互作用,机械臂作业运动以及伐木头作业操作运动,使操作人员能够更快地适应熟悉驾驶和采育作业,减少安全隐患和装备损耗,提高装备作业安全性及效率。     

作物生长过程模拟模型与形态三维可视化关键技术研究

针对作物产量形成、品种适应性分析的数字化解析和可视化表达需求,以提高作物模拟模型的时效性、协同性和真实感为目标,结合物联网技术与作物模拟模型,进行了田间数据实时采集;应用多智能体技术进行了作物协同模拟方法研究与框架设计;开展了作物生长过程模拟模型及基于作物模型的形态三维可视化关键技术研究,以小麦作物为例,进行了田间试验,阐述了小麦三维形态模拟可视化系统的设计实现并进行了试验验证;构建了Logistic方程模拟小麦叶长、最大叶宽、叶片高度、株高等的生长变化,采用基于曲线、曲面的参数化建模方法和3D图形库OpenGL构造了小麦器官几何模型。结果表明小麦叶长、最大叶宽、叶片高度和株高模拟模型R ²值在0.772~0.999之间,回归方程的F值在10.153~4359.236之间,且Sig.小于显著水平0.05,模型显著性较好,模型的拟合度较高。本研究将作物模拟模型结果和形态结构模型有效结合,实现了以小麦为代表的作物在不同管理措施条件下的生长过程形态三维可视化表达,为作物生产数字化系统应用提供了更有效的途径,该技术体系与方法同样适用于玉米、水稻等作物。     

不同送风和载物方式作用下冲击式速冻设备中虾仁冻结过程的比较

以明虾虾仁为研究对象,利用数值模拟结合实验验证的方法,研究两种送风方式(单侧送风和双侧送风)和两种载物方式(板带载物和网带载物)对虾仁冻结过程的影响,找到使虾仁冻结时间最短的送风和载物方式。研究发现:对于虾仁冻结来说,采用双侧送风+网带载物可以使虾仁表面流场流速更大,有利于提高换热效率,减少虾仁冻结时间,相对于其他送风方式和载物方式来说可缩短虾仁冻结时间的14%～25%;双侧送风有助于低速侧形成提高虾仁下表面流速的涡流,而网带载物可以避免在虾仁下侧面与网带交界处以及虾仁头部形成射流"真空区",上述均有助于提高虾仁表面风速,缩短虾仁冻结时长;但是冻结速度越快,虾仁冻结均匀性则越差。在本次实验中,虾仁内外最大温差出现在实验组D(双侧送风+网带载物),最大温差可达13.02℃。